Introduction to the structure and principle of stainless steel reaction kettle

Stainless steel electric heating reaction kettle:

The stainless steel reaction kettle uses an electric heating rod to heat the thermal oil inside the jacket, causing the thermal oil to quickly rise to the corresponding required temperature. Then, the temperature controller controls the electric heating rod to power off and maintain a constant temperature. The temperature control device can also convert the material temperature into an electrical signal by inserting a temperature sensor vertically into the tank from the top, and transmit the electrical signal to the digital temperature controller on the electric control box to display the temperature of the material in the tank, thereby adjusting the material temperature. Electric heating reaction kettle, as a heating and mixing device, is particularly suitable for small-scale, pilot or large-scale production in production units and research institutions without steam heat sources. It is widely used in light industries such as pharmaceuticals, chemicals, fine chemicals, food additives, etc.

The structural composition of a stainless steel electric heating reaction kettle:

Stainless steel electric heating reaction kettle structure: composed of a head, cylinder, jacket, heater, stirrer, mechanical seal, transmission device, and bracket. The inner surface of the kettle is Bull polishing to ensure that there is no sanitary dead corner. The fully enclosed design ensures that the material is always in a sterile state. The outer surface can be sandblasted, ground, and cold-rolled.

Electric heating reaction kettle jacket type: divided into jacket type and outer half tube type. Both types of jacket oil heating are equipped with guiding devices, such as heating or cooling coils installed in the kettle or jacket, where the medium can be introduced to complete heating or cooling.

Electric reaction kettle agitators: paddle type, anchor type, screw rod type, scraping wall type, etc., To ensure uniform mixing of materials in a short period of time.

Electric reaction kettle transmission device: includes ordinary motors, explosion-proof motors, electromagnetic speed regulating motors, frequency converters, etc. If the speed exceeds 160 rpm, a gear reducer should be used.

Electric heating reactor shaft seal: ordinary water-cooled packing seal, tetrafluoroethylene combination packing seal, and mechanical seal.

The discharge form of the electric heating reactor is divided into ball valve or downward expansion valve.

Installation form of electric heating reactor: It can be installed with lifting eyes or floor legs.

Electric heating reactor accessories: sterile respirator, CIP cleaning nozzle, mirror, flange, sanitary quick opening manhole, etc.

Use of stainless steel electric heating reaction kettle:

Electric heating reactors are widely used in industries such as petroleum, chemical, rubber, pesticides, dyes, pharmaceuticals, food, etc. They serve as pressure vessels to complete vulcanization, nitrification, hydrogenation, alkylation, polymerization, and condensation